how to install a barrel

Easy Installation
Installing a barrel and stock on an existing 10/22 action is very simple and requires no special tools or professional gunsmithing. Full detailed instructions with photos are provided with all of our barrels, stocks and combos. Here is a brief summary of the steps.

Always follow safe gun handling practices.

MAKE SURE THE GUN IS UNLOADED.

1		Remove the existing barreled action from the stock. Simply remove the magazine, remove the takedown screw in the bottom of the stock, remove barrel band if present.The barreled action will lift out.
2		Remove the existing barrel from the action. Remove the two 5/32” allen bolts that secure barrel to the action with the Barrel Retainer V-Block. Pull the barrel forward out of the action.
3		Install the new barrel. Clean and lubricate both the inside of the action and the base of the barrel. Insert new barrel, being careful to align the notch for the V-block. Reinstall and tighten the V-block.
4		Reassembly. Install the newly barreled action into the stock and secure with take down screw.